I broke my fan switch and need a replacement. The brand name is "Shine Top" model number LS-102
Add your answer here.
Check out some similar questions!
Replacing fan motor relay switch with upgraded switch [ 4 Answers ]
Hello, I've searched online to locate a replacement fan motor relay switch for an old Fedders propane heating unit in my greenhouse. The replacement should be fairly easy to do, however the part I was needing ( RBM 84-20103-301A) was listed as obsolete and was replaced by (McQuay part #...
Ceiling Fan lights shine bright, but then dim after 5 seconds [ 1 Answers ]
We bought a ceiling fan that takes 4 - 40 watt bulbs. We placed 4 - 60 watt bulbs instead and noticed the diming from the very first time after installation. Is this a safety feature built into the fan and if so, what component does this? Thank you for your help.
HEAT-OFF-COOL system switch - AUTO-ON fan switch [ 1 Answers ]
From an Email: ''Dear asklabman, I am a first time house ownere & having an issue with my Honeywell T8112 Programmable Thermostat. Thermostat has two switches for the fan - AUTO FAN & FAN ON switches and three switches for thes system, COOL, HEAT & System OFF modes. Yesterday we turned ON...
HEAT-OFF-COOL system switch - AUTO-ON fan switch. [ 2 Answers ]
Dear Gurus, I am a new house owner & not used to thermostats. We have Honeywell 8112D thermostat. We recently turned ON our Fan switch (in the thermostat). Now the fan is not turning off. It is continuously running even when the system is in OFF & Fan is in AUTO mode. We tried reducing the...
Wiring ceiling fan switch and light switch [ 1 Answers ]
I had to replace the flywheel on my Hunter ceiling fan and I had to remove the light kit that was attached. After I installed the flywheel, I forgot to mark the wires for re-connection. This is an older model fan. There are five wires coming from the fan motor--brown, blue, white, black and...
View more questions Search