Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Service entrance cable
[ 23 Answers ]
I am re-wiring an old house. It is a small 2 bedroom, 1 bath house. We put in a 200 amp service and need to run a service entrance cable about 20 -25 ft to the inside breaker panel. My question is how big of a gauge wire should we run for the service entance cable. #? 3 conductor with ground in...
Service entrance cable
[ 2 Answers ]
Having new 100amp meter installed professionally,but I am burying wire to the building which is 125' from where meter is mounted. Will I have to upsize the size of wire because of the distance? I also intend to enclose in conduit, so I'm not worried about using "U" coded wire
Does the service entrance cable need to be changed after an upgrade
[ 5 Answers ]
Saturday night we had an electrical emergency, our main breaker in our 100 amp service panel blew, smoke pouring out melted breaker kind of blow. We replaced the entire service panel and upgraded to 200 amp since we were interested in doing the upgrade anyway and that seemed like a good time to do...
What is the cable/wire gauge (product name) for installing 200 Amp Service Entrance
[ 1 Answers ]
I am installing a new service entrance to upgrade my home electrical service to 200 amps. 1 Please tell me what gage wire is required from the meter to the weather-head? The service panel with main breaker is inside the laundry room 25 feet from the outdoor meter loop. I will run the...
Entrance cable
[ 4 Answers ]
How do I cover the electrical service entrance cable attached to the side of my house? What do I use? The original covering has worn out in spots, exposing wires beneath. Also is this something a dummy can do? View more questions Search
|