Ask Experts Questions for FREE Help !
Ask
    mudfish78's Avatar
    mudfish78 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 10, 2011, 01:39 PM
    Need to run a new circuit for a welding machine need to know what wire size to use.
    220 volt 1 phase 50 amp 75-100ft run from panel.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Oct 10, 2011, 01:50 PM
    #6cu
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How many KWH would it be to run a Welding Machine for 1 hour on 480 V? [ 2 Answers ]

What size wire do I need to run to get a 100amps. 225ft. using direct burial wire? [ 5 Answers ]

What size wire do I need to run to get a 100amps. 225ft. using direct burial wire coming from a 200amp. Service? Any info. Would be appreciated. Regards, Garry

What size wire would you need to run a 60 amp circuit 150 feet [ 3 Answers ]

Feed to a barn for some lights, receptacles and an air compressor

What wire size do I need to run for a spa? [ 3 Answers ]

I have a 230 volt spa that runs off a 50 amp single phase breaker. The length of wire I need to run is about 135 feet. What wire should I use?

What wire size do I need to run for a spa? [ 1 Answers ]

I have a 230 volt spa that runs off a 50 amp single phase breaker. The length of wire I need to run is about 135 feet. What wire should I use?

View more questions Search