Rewiring a table lamp with a 3-Way rotary switch in base. Original sw. has 3 wires - Red #2 /Black #L and Brown 1 New switch as 3 wires Black #L Red #1 and Blue #2 Lamp bulb socket is Red for Small connection, Blue is Long center tab, White to neutral outside blub connection. I wired this:...

Rotary switch has Black, Red and Blue wires. Each lamp has 2 white wires.

I purchased an old rotary switch, unfortunately without a wiring diagram. It has four settings (off, low, med, hi), and four wiring poles. Contacts rotate at two levels and connect the poles as shown in the attached JPG. My question is how to wire this thing (I assume there are three incoming...

I need wiring instuctions for a tower mfg corp. 6A. 120V 3-way rotary switch for a exhaust fan

I am re-wiring a vintage gooseneck desk lamp and I stupidly forgot to record which wires are connected where. I'm needing some assistance. I usually figure these things out, but this time, I'm stumped. There are two sets of wires coming from the two lamp sockets. Black and White. The...