How do I reprogram a Hunter ceiling fan remote control #85095-01?
Add your answer here.
Check out some similar questions!
Hunter Fan/Remote Control Installation [ 2 Answers ]
Hello All, First-time home owner attempting to install a Hunter fan w/ Hunter remote. Having an issue with understanding the wiring set-up. Please help!! Ceiling originally had light installed with: (1) White wire (in use) (1) Yellow wire (in use) (1) Yellow wire (not in use)
Hunter ceiling fan Remote control replacement. [ 22 Answers ]
This is driving me nuts. OK I know where the b and w wires go from the fan to the receiver also the " one " that says light out " which is red. What I have left on the receiver is Fan out and Common out. From the fan there is a brown wire by its self and a bundle with red, yel, gray,...
Hunter ceiling fan remote control replacement [ 5 Answers ]
I was given a replacement remote/reciever at Lowe's. Some kid told me it would work. I ohmed out the motor which has two windings (pink to yellow and red to grey). I paralelled the two windings with the new receiver output and neutral. The fan doesn't run as fast as it did before. The winding ohmed...
Hunter remote control programming [ 4 Answers ]
I just purchased a home that has 2 hunter fans. The remote control has part # 85095-01. I need to know how to program it to the fan. I can hear the fan click but it doesn't engage and the light has to be turned on by unscrewing the light bulb. I know this is a programming thing because I used to be...
View more questions Search