Replacing the zing ear switch in a ceiling fan
Asked May 14, 2009, 07:31 PM
I have found the correct zing ear switch to replace the existing one , in which the chain broke off. I was able to remove the 4 wires from the old switch by placing a small flat head screwdriver in each slot and pulling each wire.
How do I insert the 4 wires into the new switch?
Do I need to take the switch apart?
I hesitate to simply push the wires into the slots on the new switch, in fear that this is not correct. If I have to pull the wires back out of the switch, I could damage somehting inside the new switch as I try to get them out.