Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing a 3-wire, 2-speed switch
[ 4 Answers ]
The fan in the fume hood above my stove is broken. I believe it's the switch so I need to replace it. The whole kitchen is over 35 years old, though and the fan is a dynavent. I believe the switch is soldered and don't know how to undo it to see the wiring of the switch. The switch is a...
Replacing light switch w/ fan switch
[ 1 Answers ]
I am installing a new ceiling fan (hampton bay model 184-201)my question is when installing the fan swith in place of the light switch which wires go where. The light switch has three wires all black painted white. The fan switch has two black (hot) and one green (ground). I am assuming that two...
Replacing Ceiling Fan Switch
[ 1 Answers ]
I need to replace a switch in a Ceiling Fan. I know that black is power, there are 3 other wires for speeds, Which goes where? It is numbered 1-2-3. Thank you
Replacing light fan switch
[ 1 Answers ]
Hello this is my first time here , I hope I`m asking the right question and using the site appropriately. I bought a new light ceiling fan switch , old was burned, is a two wire switch it had two blue wires to it, each wire is on each side of the switch , the new switch has two BLACK wires on...
Replacing a 3 speed fan switch
[ 1 Answers ]
How do I replace a three speed ceiling fan switch. I have the switch but I don't know where the wires go! On the switch it says 1,2,3,Land there is a hole for each number and letter.the wires are pink,gray,black,and yellow. I don't know what hole each them go into! Can someone please help me!! ... View more questions Search
|