I bought a Leviton 3 way switch with pilot light to replace one of the two - three way switches for my basement lights. I am stumped about what I have to add to the wiring to make this work properly. It shows "traveler" wires between two pilot light switches in the diagram that came with it. ...

I took down the ceiling fan/light combo in my garage with plans to install two receptacles to plug fluorescent lights into. The fan was controlled by two 3-way switches, and the light by two 3-way switches. I want to have the switches control the new receptacles. I was able to get one of the...

How do you wire a ceiling fan to two separate switches- 1 to the fan and 1 to the light switch which happens to be a 3-way switch? There is a 3 wire running to the fan and a 3 wire running to the next 3 way switch. So in the box I have 6 wires and 2 grounds. Puzzeled Brian

We are installing a ceiling fan/light. One wall switch controls the light; the other controls the fan. However, the unit came with a wall switch that controls them both, rather than separately. How do we combine the two switches so that the light and fan operate on the one control which came...

I am replacing a ceiling fan that has 3 switches that control the light and 1 that controls the fan. I have 4 wires coming into the box for the fan (black, red, white and grnd). The new ceiling fan has a remote that has to 2 lead wires that are supposed to be connected to the source and 4 (2 for...