Ask Experts Questions for FREE Help !
Ask
    new diyer's Avatar
    new diyer Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Nov 9, 2009, 10:09 AM
    Replaced outlet, now light not working!
    In a basement bedroom I had a dead outlet. I replaced it along with two others, the light switch and the light fixture. Today I realize that the closet light (that I did not touch) no longer works (it is on the same side as the dead outlet- which still doesn't work asfter being replaced).
    What could this be? I disconnected the dead outlet and stuill, nothing... This is my first time touching any electrical and I am lost!
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Nov 9, 2009, 10:43 AM

    How comfortable are you in handling electricity?

    For your immediate need, my first suggestion is to go to the main service panel or a sub panel if your connected to the subpanel.

    Make sure that the breaker has been properly re-set. Turn the circuit all the way to it's off position and then turn it back to the on position. If all of the circuits now work, then just repair/replace the receptacle.

    If resetting the breaker does not solve the issue, then I politely suggest that you call a licensed electrician.

    If you ask him/her to they can teach you some of the basics behind troubleshooting a circuit.

    Also, may I recommend that you either purchase or borrow some books on basic residential wiring to get some of the foundational understanding of the wiring.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dual fuel rheem furnace not working, defrost control board replaced still not working [ 1 Answers ]

Hello there, I have a Rheem furnace and is only one year old. Recently my furnace didn't come on so I had someone come out and look at it and it turns out it was the defrost board on the heat pump that was bad. I replaced the board with a new one and turned the system on and it worked on heat and...

Outlet not working after being replaced [ 2 Answers ]

We have an outlet not working, we replaced it and it still does not work

Replace Vanity Light with Convenience Outlet with Light Only [ 2 Answers ]

I am replacing an older style vanity light in a guest bathroom. The old light has a convenience outlet built into the light fixture base. The new light has only a black, white and ground wire. The painters removed the old light so I do not know how it was connected. The wires coming from the...

Multiple Outlet Outage Replaced Everything [ 15 Answers ]

OK guys I have spent some time on here trying to look for the answer before I asked a question. I hate repeats myself. I have found many with similar symptons but the fixes have not worked. I will not say that I am an expert; though I completely understand how the wiring works and have done it...

Condenser motor replaced still not working #2 [ 1 Answers ]

Wiring looks good. Does it matter if capcitor is touching metal ? We had no way to attach the new capiter. The old capiter with 3 wires is enclosed in plastic tube, so we did not remove it, just bypassed it. New capiter has 2 wires, instead of 3. When we unplug the new capitor, fan still...

View more questions Search