Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ceiling fan will not work after replacing 3 speed pull chain switch
[ 129 Answers ]
I just recently replaced a 4-wire (3-speed) Ceiling fan switch on my ceiling fan. The chain had broken off inside the switch. After installing the new switch, the fan wouldn't turn At all. I have tried the swithes at all speeds And even went out and purchased another switch thinking the first...
3 speed, 4 wire ceiling fan pull chain switch replacement
[ 20 Answers ]
I recently changed the 3 speed 4 wire switch on a ceiling fan as the old one had a broken collar. I purchased a replacement at Lowe's. The replacement worked at high speed only. I was careful in noting which color wires went into slots 1,2, 3 & L. Thinking that the new switch was defective, I...
Replaced ceiling fan switch will not turn off
[ 1 Answers ]
A replacement ceiling fan switch was purchased from Home Depot for a three speed Hampton Bay (Marco Polo) ceiling fan. Both the old and new switch had the same wire colors (L-black 1-grey 2-brown 3-purple) and the new switch was inserted according to the colors. The fan will not turn off now. Is...
Wall Speed control on old ceiling fan install new with pull switch
[ 3 Answers ]
I have an old celing fan purchased in the 80's with a wall mount speed control knob. I purchased a Hampton Bay, Huntinton III 522-306 3 speed control with a pull chain. When installing the unit the fan does not work. I have a white wire, a black wire, a blue wire for the light and a ground...
Ceiling Fan Pull String 3-speed Switch
[ 1 Answers ]
What if someone by mistake wrongly connect the load on the switch (L) to one of the other wires (yellow, red, green)? Can this (cross wiring or mixing) cause (cross-wire) damage to the motor? Please help. I need this help urgently. View more questions Search
|