Ask Experts Questions for FREE Help !
Ask
    cincy-david's Avatar
    cincy-david Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 8, 2008, 07:48 AM
    Remote control replacement is not functional
    Hi

    I have a Hunter Original Ceiling fan with light kit. It came with Remore 85095-01. The remote recently died and I ordered the replacement from Hunter.

    The problem is, none of the current replacements from Hunter have the button to reverse the directions of the blade with the season change.

    Does anyone know If I am just stupid and there is an answer, the instructions have noting, or do you know where I can find a replacement that will work.

    Thanks
    DAve
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Jun 8, 2008, 12:20 PM
    Assuming the broken remote had a reverse button.. . Hunter should have sent you a remote with the reverse feature. Call them back and tell them they did not send you the correct part.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hunter ceiling fan Remote control replacement. [ 22 Answers ]

This is driving me nuts. OK I know where the b and w wires go from the fan to the receiver also the " one " that says light out " which is red. What I have left on the receiver is Fan out and Common out. From the fan there is a brown wire by its self and a bundle with red, yel, gray,...

How to change ceiling fan remote batteries on a hamilton bay remote control unit [ 3 Answers ]

Before I break the darn thing, can you tell me if the back panel comes off or if I have to unscrew the top and bottom screws?

Halsey Ceiling Fan Remote Control Replacement [ 1 Answers ]

Does anyone know where to buy replacement remote controls for a Halsey Ceiling Fan? Here is the information on the back of the old remote, which I need to replace: Remote Control Fan speed control Model UC-7040 120V / 60Hz 1A / 250W Made in Taiwan Used with Halsey Ceiling Fan Models HC HP...

Remote control replacement for 220-240 fan [ 1 Answers ]

I have an Omega fan (apparently made by Smeg). I'm in New Zealand, where we have 220 power. This fan is operated by remote only, no pull chain available. The fan can spin forward and reverse, and after 3 months, it no longer reverses. I think the remote control kit is garbage and would like to...

Remote control ceiling fan transmitter/receive replacement [ 2 Answers ]

Hi -- I just replaced the transmitter/receiver on my remote control light/ceiling fan, and it's working just fine. Thing is, before I installed it, I noted that the new control set said not to use on solid state ceiling fans. Because I didn't buy the fan in the first place, I wasn't sure of even so...

View more questions Search