Ask Experts Questions for FREE Help !
Ask
    Jerry Randall's Avatar
    Jerry Randall Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 10, 2010, 01:51 PM
    Remote control and light switch wiring
    Dear Sirs:
    I have a Harbor Breeze 69 in remote ceiling fan . The remote works the fan only but you cannot turn the fan from the light switch at all and then stumbling in the room at night and try to find the remote control is a joke. This fan has two blades that look like air plane blades the number on the fan is item # 77461 We purchase:confused:d the house and this house is only 3 yrs old but we can't find any information on the fan we have the wiring diagram but it says nothing about the light wall switch itself. Could the fan be wired incorrectly? The settingts are 1 2 3 4 but we want to operate the fan without using the remote also when you turn off the light switch it turns the fan off only but you cannot turn the fan on again by the wall switch you have to use the remote again and within a few hours if we leave the battery in the remote it totally goes dead within hours what gives. Any sugestions??
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Jan 27, 2010, 02:39 AM

    Nope, this is the way it is made. Buy a fan without a remote.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Remote Control Ceiling Fan wiring for a double wall switch [ 5 Answers ]

I purchased a Hunter remote control ceiling fan. I've replaced fixtures before in my home, so I thought this would be a no brainer. Well the remote thing has me stumped. House is pre-wired with a double wall switch, one with a dial control for the fan, the other switch is for a wall outlet...

HUNTER LIGHT SWITCH (has fan and light control) [ 4 Answers ]

Switch for light control broke off. Having trouble taking off wall light switch cover. I removed the skrews but the switch cover doesn't pry off wall. Thanks.

Hunter fan w/ light & reversing switch on remote, remote not working properly [ 1 Answers ]

Hi, I have a Hunter fan with light and remote control, with reversible switch on the remote. RC was working fine until recently, and now, the fan will not turn off with it. I do not have a wall switch. The light works fine with RC, and the reversing also works, so does the fan speed. So, what...

The dip switch on a remote control [ 2 Answers ]

Ok, yesterday I learned that to change the frequency on the remote that runs my ceiling fan, I need to adjust the dip switch. Right now, I have two fans that are on the same frequency and when I turn one on, the one in the other room comes on too. So I need to adjust the remote and the canopy? ...

Wiring for DUAL wall switch to control Ceiling Fan and Light Separately [ 20 Answers ]

Greetings. I recently bought a new ceiling fan and light kit to replace one that had been in my sun porch for over 20 years. A dual wall switch was always used to control the light and fan separately on the older fan. The fan speeds were controlled by pull chain. Before I took the old fan down, I...

View more questions Search