Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Looking for a 50 amp breaker compatible with a milbank meter breaker box.
[ 1 Answers ]
Want to add a 3 or 4 wire 200 amp run from street meter breaker box (Milbank) to a electric stove.
Can I pull meter head to relocate breaker panel
[ 4 Answers ]
I need to move my panel to the meter location (20 feet) as the main feed wire is on the inside of the house and runs about 20 feet. I'm told that this isn't up to code? I live in Pgh. Pa. Thanks for any advise, John
Back to back meter base and breaker panel
[ 9 Answers ]
Hi, I want to mount meter base and breaker panel back to back, running the cable through the back of the meter into the back of the breaker panel. Breaker box will mount on a 2X4 exterior wall, and I would connect the two boxes with 1 1/2 nipple. Is there a problem with this idea? I'll be talking...
Ten foot rule-confused..
[ 3 Answers ]
I've read various posts concerning the 10 foot rule where a disconnect is needed at the meter if the load panel is more than 10 feet from the meter. This is of interest to me since I would like to relocate my load panel. Question #1-Am I interpreting this correctly? Question #2- If using a...
6 Foot Rule & Radiators
[ 2 Answers ]
Is a wall with an iron steam radiator within 4 inches of the wall considered wall space when determining receptacle distance with the 6 foot rule? I have looked in article 210 of the NEC 2005 and have not been able to determine a definitive answer. Thank you. View more questions Search
|