Ask Experts Questions for FREE Help !
Ask
    sdworboys's Avatar
    sdworboys Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 12, 2008, 04:33 PM
    Questions about Hampton Bay fan 48670
    I need more specs on the above mentioned Hampton Bay fan, especially the length of the down rod, the length from ceiling to bottom of fan light, whether it is 3 way mount, what the blades are like.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Mar 12, 2008, 08:00 PM
    Assembled Depth (In Inches) : 12.83 In.
    Assembled Height (In Inches) : 11.81 In.
    Assembled Weight (In LBS) : 29.50
    Assembled Width (In Inches) : 24.70 In.
    Blade Length : 48 In.
    CircleEFriendly : False
    EnergyPlus : False
    Fan Width : 48 In.
    Indoor or Outdoor : Indoor
    Lighting Included : Yes
    Maximum Hanging Length (Ft.) : 7 Ft.
    Number of Lights/Bulbs : 3
    Quick connect system : No
    Recommended Base Type : E12/Candleabra Base max. 40 Watt
    Recommended Room Size : 10x12x48
    Remote Control : No
    Shade/Glass Type : Single Veined Alabaster Glass Shade
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan-light works-fan doesn't [ 6 Answers ]

I installed a new Hampton Bay ceiling fan outdoors and the light works from a wall switch but the fan doesn't work at all. There is a white, black, red and ground wire coming from the ceiling. There is a white, black, black/white stripe (light) and green ground coming from the fan. I attached...

Hampton Bay ceiling fan light fixture stopped working but fan still works why? [ 14 Answers ]

New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:

Hampton bay ceiling fan lights & fan not operating [ 17 Answers ]

Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Hampton Bay Ceiling fan: fan speed pull chain [ 2 Answers ]

The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?

View more questions Search