Ask Experts Questions for FREE Help !
Ask
    jeffotra's Avatar
    jeffotra Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Jun 5, 2007, 08:32 PM
    Power but no light?
    I just wired up some track lights. Five in a row. And they all work except the last one. I tested it and it has 120 volts I put the light in and it has 120 volts. I took all the lights out of the first 4 and still no good. Could the last one be grounded? But wouldn't that make the first 4 not work as well. Any feedback would be great
    Thanks-
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jun 6, 2007, 04:52 AM
    Try a new bulb?
    jeffotra's Avatar
    jeffotra Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Jun 6, 2007, 07:53 AM
    Yea I tried a new bulb even put the bulb in another fixture to make sure it worked there still nothing
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #4

    Jun 6, 2007, 08:24 AM
    Look at the little contact points, make sure they are not bent,
    Are you installing on track 180 degres out.
    Remove a working one, look what side of track single contact is on.
    Also compare good and bad one side by side.
    jeffotra's Avatar
    jeffotra Posts: 4, Reputation: 1
    New Member
    		  
    #5

    Jun 6, 2007, 08:38 AM
    Thanks ill give it a shot
    jeffotra's Avatar
    jeffotra Posts: 4, Reputation: 1
    New Member
    		  
    #6

    Jun 13, 2007, 11:02 PM
    The common wire was loose on the previous circuit tthanks
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Computer won't boot, but power light blinks [ 11 Answers ]

So I have this computer. It worked just fine for a while. But now it starts up, boots up into Windows just fine. After about 2 minutes or so, the computer will just randomly turn off. The power light will start blinking, constantly, once a second or so. I hit the power button, nothing happens. I...

No power in outlets or light switiches [ 2 Answers ]

I changed some light switches and outlets to match the rest of the house. My house is a older home. So when I went to turn the breaker back on sparks came out. So I check the wiring then I change the breaker then there was no more sparks but only one light switch works for that breaker and now 2...

Blinking power light [ 1 Answers ]

I recently replaced the power supply on my computer. Now whenever I shut the computer down the power indicator light located on the front of the tower will blink rapidly followed by a clicking sound. Can anyone tell me what the problem id

Power light flashing. [ 1 Answers ]

The power light on my MESH tower is flashing. Why?

Connecting a power transformer to a light? [ 8 Answers ]

Hi, I have an outdoor lamp at my house that is/was using a power transformer for the lamp. First question: Why? The wires on one of the windings has been ripped off the unit and the base of the unit is very rusty. I do not know the manufacturer or the specs of the unit. So, I bought one,...

View more questions Search