 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Outside disconnect boxesI have a appt. that had its own meter and panel (100amp) with
I have a appt. that had its own meter and panel (100amp) with a disconnect outside, my house has its own meter [but they are side by side in a shared meter box] its 150 amp with no outside disconnect and #2 service wire which is under sized. I have joined house and appt. together what should I do to have one meter.
|
||||
Check out some similar questions!
Directly below a service meter before the underground wiring, do I need a fused or breaker type dsiconnect, or can I have a regular knife throw disconnect on a 3 phase system? Thanks
I got a friend who has a detatch garage and he wants 100amps run to it. I got about 50 to 60 ft of basement to run through and then I got to go through a brick foundation wall and then I would like to run underground piped to the garage and piped it right to the sub panel. How do I run the sub...
I have a house with a 200 amp service. All of the breakers are in use. I want to create a kitchen/washroom in my basement. I need enough amps for a washer/dryer, stove/refrigerator, 8-10 lights and plugins. I don't thing a 60amp double pole breaker is big enough, how do I install a 100amp subpanel?
The panel I am replacing was install by a electrician about 20 years ago. It has served my needs until now. The old sub panel has 6 breakers and the new one has 12. The distance from the house to the garage panel is the same as is was (about 28' of wire). I installed the wire from the house the...
I would like to relocate my main 100Amp panel to the inside wall of my garage. Code saids the main panel must be on an outside wall. What I was thinking of doing Is install a New Main panel on the inside wall of the garage and put a 100Amp disconnect at the old panel location. I am aware of...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
