Ask Experts Questions for FREE Help !
Ask
    Charks's Avatar
    Charks Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 13, 2013, 03:46 PM
    Murray style EP20-20 CU 10-14 al 10-12 breaker will not reset
    The above breaker is stuck between the on and off and will not reset. What can I do to reset it. My refrigerator is depending on u. Please help me. We keep trying to turn it off and on... my fingers r very sore.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Jul 13, 2013, 05:29 PM
    It has tripped.
    Turn it off then back on.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #3

    Jul 14, 2013, 02:50 AM
    Sometimes a breaker will trip but the handle on the breaker will not have enough throw to move to the full off position. Usually all you have to do is move the handle as far to the off position as possible and then turn it back on.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What does it mean when you reset a circuit breaker won [ 1 Answers ]

I came home from work and my pool pumpm was off, I turned the switch to off and went to reset the breaker and it will not reset could the breaker be bad?

1 breaker causing another breaker to trip when I reset! What is This about? [ 5 Answers ]

I reset a breaker and it immediately trips its self and another breaker... this never happened before... if I reset 1 its OK but when I reset the other breaker they both trip... and these are 2 separate circuits... the 2 breakers are not even next to each other in the panel

Replacing old style fues box to circuit breaker setup [ 10 Answers ]

I will be doing a complete replacement for my grandmas house of the original fuse panel to a modern circuit breaker setup. Is there anything special I need to know, and what should the cost of parts only be for this. I have much experience with A/C and D/C electrical (I was the Sr. Site Manager...

GFI Circuit Breaker will not reset [ 3 Answers ]

I have a GFI Circuit Breaker connected to my outdoor wiring. After a very heavy storm the power to my holiday lights blew. I attempted to throw the GFI switch, but it will not reset. Do I need to replace it or am I doing something wrong. Also if it needs to be replaced, how difficult a job is it? ...

Must reset furnace breaker to activate [ 3 Answers ]

I installed a ritetemp digital thermostat and appear to have 2 problems. 1) I’m not getting any ac to the thermostat, so it does not activate the furnace. I know I need to check the 24v transformer and common per the other threads. But, if I go to the circuit breaker panel and reset the furnace (80...

View more questions Search