Ask Experts Questions for FREE Help !
Ask
    dummymer's Avatar
    dummymer Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Nov 6, 2011, 08:08 AM
    Mini split
    Is it safe to use a 20a breaker for a 15a mini split
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Nov 6, 2011, 08:16 AM
    The question is far too vague.
    What is a "15A mini split"?

    What do the specs say?
    What is the MCA, or minimum circuit ampacity?
    What is the maximum breaker rating?

    This info should be on the side of the condensing unit.
    dummymer's Avatar
    dummymer Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Nov 6, 2011, 02:42 PM
    Min ampacity is 12 and it says max fuse size (time delay) 15.What happened is I ran 12-2 wire because I thought if I ever wanted a larger unit I would not have to run another wire.Then to save room in the panel I wanted 2 single breakers replaced with the breaker that has 2 single 15 on the outside and a double 15 in the middle. I assume the electrician saw the 12-2 wire and thought it was 2 single 15 and a double 20 that I wanted and that is what he installed.Just noticed it and was wondering about it. THX.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #4

    Nov 6, 2011, 04:26 PM
    If it says max fuse/breaker is 15 you really should change it. If anything for warranty reasons if you ever have a problem. It's a cheap and easy fix.
    dummymer's Avatar
    dummymer Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Nov 6, 2011, 08:07 PM
    OK. Thank You.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What does it E3 mean on a mini split a/c AUX? It doesn't work [ 3 Answers ]

Our mini split AUX (2 tons.) stopped working, and displays a message on the screen that says only E3, what does it mean and how can I fix it so it works?

Mini split vs. Vent system [ 3 Answers ]

Hello, I live in a 90 year old radiant heated house, no air vent system, outside of Philadelphia. Im going to put in AC but which system is best. Im still working on quotes but here's what I have. I live in a 11500 sq. foot stone home with finished 3rd floor attic rooms. Not all rooms...

Mini Split Issues [ 11 Answers ]

We recently purchased three mini split systems (one ton, one and a half ton, two ton) from a privately labeled retailer, Harbor Point. Apparently, the systems were manufactured by Chigo. The one and a half ton system has two interior units serviced by one outside condenser. Two of the three (one...

Mini-Split wiring [ 12 Answers ]

I am installing a Mitsubishi mini-split with an indoor and an outdoor unit (MUZ-A15NA). I ran 220V wire from the electrical box outside. It is on a 15 amp breaker as the instructions have it rated as 15 amp max. I purchased a disconnect switch for the outdoor unit that is a 60 amp fuseable...

Mini split Problems! Turns off [ 4 Answers ]

Hi, I have a couple of mini split ac's and am having some issues. One works fine for about 10-30 minutes and then just turns off. Fan stops but it puts out cold air when it runs. This one is a bondaire r22 unit. I have another 33,500 BTU dual zone mitsu mr slim 17+17. This unit doesn't cool...

View more questions Search