Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hampton Bay Remote Ceiling Fan - light works - no fan
[ 2 Answers ]
After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...
Ceiling fan wiring, 2 blk, 2 what, 1 red, 1 grn from ceiling
[ 3 Answers ]
I am attempting to install a hampden bay minuet 2 fan. The prexisting ceiling wires consist of two black, two white, 1 red, and my ground wire. A basic lite fixture was installed previously and controlled by a single wall switch. The wall switch has 1 red on the bottom and two black on the top...
Ceiling fan remote control coverting to light/fan dimmer
[ 2 Answers ]
I am currently remodeling my home and am coming across a major problem that NO ONE seems to have an answer for. I have two ceiling fans that operate via remote control. The rest of the ones in my home are the popular "pull down" chains - and those work prefectly with the new fan/light dimmers...
Installed Ceiling Fan: Fan Works/Lights Quit Working
[ 3 Answers ]
I successfully installed a Hampton ceiling fan about three maybe four years ago and it has worked just fine up until about 4 months ago when the lights would start going off and then sometimes come back on intermittently. Suspecting a loose connection, I removed the light housing and found that...
Hanging ceiling fan from vaulted ceiling peak
[ 2 Answers ]
Want to install Hampton Bay's Berlini model 729395 on a cathedral ceiling with a single ridge beam. Want to hang fan from the peak and there's not enough room for the canopy to cover the hanger bracket. Is there any extenders for this? View more questions Search
|