Again, thanks to everyone for all their valuable information as I wire up my Recording Studio addition. :) You guys are great! ;) I have another question reference the use of Junction boxes. On a couple of my framed walls, where I wired in outlets, some of the outlets (for like Exit Signs) are...

The house I bought has an GFI outlet in the middle of the back yard (they had a pool). I want to remove that outlet and place it further at the back of the property. Is there a issue with splicing the old wires to new ones w/wire nuts, putting them in a small junction box & burring it?

Is it OK to take a single 15A line off a 20A branch circuit. Specifically, I have a new 20A kitchen wall circuit which will exist only of two 20A counter GFCI outlets. I have had to rework that wall for the gas stove and want to run a 15A outlet for the gas stove electrics. Can I just take a 15A...

I have and oven with 10/3 mc cable attached. I am going to splice this to a 10/3 romex cable that I pulled from the sub panel. Is a metal 3" deep single gang box big enough? How many cubic inches do I need? Thank you

Is critical distance measurement based on the literal distance from a trap to the vent stack, or the total length pipe from the trap to the vent? In other words, if the trap is 4 feet from the vent, but the drain pipe from the trap to the branch that has the vent connected to it is 10 feet, is the...