Ask Experts Questions for FREE Help !
Ask
    jmiralda's Avatar
    jmiralda Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 24, 2010, 03:41 PM
    Litex ceiling fan remote problems
    I replaced the batteries on my remote control and I seem to have lost the connection between the remote and the ceiling fan/light. How do I reprogram the remote to reconnect?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Jan 27, 2010, 01:13 AM

    Check to make sure the dip switches in the fan match those in the remote.

    Are you sure the battery going dead was the problem in the first place?

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More
    jmiralda's Avatar
    jmiralda Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jan 31, 2010, 05:01 PM
    Assumed it was the batteries as haven't changed them since getting the fan installed.


    Guess the real question is is their a code that I can try to reconnect the remote to the fan
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Feb 1, 2010, 08:19 PM

    Did you check the dip switches? The link in my last post has instructions.
    mikalele's Avatar
    mikalele Posts: 1, Reputation: 1
    New Member
    		  
    #5

    Feb 18, 2012, 09:24 AM
    My remote got very hard to use. It would work sometimes and other times it would not work or I had to press the button very hard and hold it down several seconds to get it to work. I thought I would have to buy a new one, but decided to take it apart. I found the circuit board had a lot of black on it from the rubber used for the buttons. I cleaned the circuit board and the back of the rubber buttons with paper towels then put it all back together. Now it works like new! There are 2 screws that have to be removed and that's all there is to it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling fan remote problems [ 11 Answers ]

Has anyone ever heard of a Designer's Choice ceiling fan? We have two of these ceiling fans in our living room and they like taking turns not working. One will work for a while while and the other will not turn on at all. I haven't been able to find this brand of ceiling fan anywhere to contact...

Harbor Breeze ceiling fan wall remote and LCD remote [ 1 Answers ]

Hello, I've just installed 2 harbor breeze fans that came with LCD remote. Everything works as they suppose to. 2 remotes controlling each fan with dip SW set up. Then, I thought it would be nice if I purchase the wall remote unit so that I do not have to search for remote all the time....

Hampton Bay Ceiling fan problems with remote [ 1 Answers ]

I have a Hampton Bay ceiling fan that can no longer be operated by my remote control. I tried changing batteries and the LED lights up when you press the fan speed buttons, but nothing happens at the fan. Both the lighting and the fan itself are non-functional. Is there any suggestions on what...

Litex Remote Control [ 4 Answers ]

Hi, I have a Litex ceiling fan remote control that I recently installed. The ceiling fan's lights now flickers (pulsates) when it's turned on. Increasing or decreasing the dimmer effect doesn't change the flickering. I tried changing the dip swith settings as I have two other Litex remotes, but...

Ceiling fan remote problems [ 10 Answers ]

I have a Hampton Bay Ceiling fan and I also bought a Hampton Bay remote to go with it. The light and fan work fine without the remote. The remote will only control the fan... why won't it control the light dimming action? Thanks!:(

View more questions Search