Ask Experts Questions for FREE Help !
Ask
    JackPPitts's Avatar
    JackPPitts Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 28, 2014, 09:50 AM
    Light switch question
    Hello,

    I recently bough home that as built in the 40s. They electrical has been updated so I don't think there is old wiring I will need to worry about. In one of the bedrooms a single light switch is connected to both a wall outlet and the ceiling fan so if I want to turn off what's plugged into the outlet it will also shut off my ceiling fan. Is there a way to add another switch to control one so the existing switch just works the outlet or the fan? I have basic wiring skills so if it's not to complicated I can probably do it myself. I'm hoping I won't need to call an electrician.

    Thanks,

    Jack
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Jul 28, 2014, 12:00 PM
    Describe the wires in the switch box. Describe the wires in the outlet box.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Jul 28, 2014, 02:17 PM
    Is it the whole outlet? Normally they just do 1/2 the outlet. If that is the case, put a child proof plug in the switch connected one and use the other half.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Light switch question [ 2 Answers ]

Im adding a ceiling fan in the bedroom. The breaker is 20amp so I'm using #12 to the 15amp switch.Then pigtailing with #14 to the ceiling fan. Can I do this or should I just go with a 20amp switch and #12 to the fan?

Another 2 wire, 3 connector light switch question [ 2 Answers ]

Hello folks, I have a wiring problem that has me stumped. I have a Leviton Model 6526 combo nightlight/wall switch. I only have a black and white wire coming from the box. It says it requires Black hot, black load and a neutral. I tried using a wire to cross-connect the 2 black poles to my...

Question when I have my hazar light switch on, they don't blink. And also my turning s [ 1 Answers ]

Question when I have my hazar light switch on they don't blink. And also my turning signals will not work I have to do it manual what can I do to fix the problem.

4 way switch light question [ 7 Answers ]

I have a 3 way switch, then a 4 way switch, then a 3 way switch. Can I wire the lights on the travelers between the first 3 way switch to the 4 way switch? The power from the panel goes to the 1st 3 way switch.

3-Way Light Switch Illuminated Toggle Question [ 1 Answers ]

Hi: Here's my dilemma. I have an outdoor flood light that is outside of the garage and has both a 3-way switch in the garage and in the house. Since I put in those windowless garage doors, I can't see whether the flood light is on or off, and many a night someone leaves the light on all night....

View more questions Search