Ask Experts Questions for FREE Help !
Ask
    orvillejyoung's Avatar
    orvillejyoung Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 5, 2012, 08:40 PM
    Light switch and delay
    I am trying to wire a light switch to a singal phase control box with a delay to the motor.how do I wire.I've tried light switch from l2 to a1 with jumper to 15 on delay and the coil from delay to the outside sw on control box
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    Jun 6, 2012, 01:49 AM
    We need to know exactly what time delay relay you have, make and model number. We need to see the wiring diagram for this TDR.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #3

    Jun 6, 2012, 05:31 AM
    Be sure the contacts handle the load, use another relay for higher current if needed.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need help changing a two wire light switch to a fan and light switch. [ 3 Answers ]

Wall switch box has two black wires and two white wires(spliced. New switch has black wire, red wire(light),yellow wire(fan), and green wire(ground). I think I need an independent wire for the fan and light. How?

Hampton breeze fan with light - light comes on after fan (about 1 sec delay) [ 3 Answers ]

The fan/light is controlled by two 3 way switches (which I checked for loose connections and were fine) the light comes on a little over a second after the fan (which comes on immediately after hitting the switch). Is there any reason for this delay? I have checked an rechecked all of my...

Delay in light coming on [ 4 Answers ]

I installed a new ceiling fan and now there is a slight delay in the light coming on. It's set up with a separate switch for the fan and the fan comes on with no delay


View more questions Search