Check out some similar questions!
How wire a light switch from red-black and white wires to a 2 wire light switch
[ 3 Answers ]
I am trying to change my light switch, but the problem I have is the old switch has a red, black and white wire connected with 3 different screw places for each wire. The new switch only has 2 connection screws, so I am wondering how to wire this up? FYI The house was built in 1954. And there is no...
I replaced pull switch lights with recess but the wall switch won't turn off the light
[ 2 Answers ]
I added lights and outlets to my basement and all of the outlets work fine. Before I started the switch on the wall controlled one light and all of the others had pull strings. I've tried everything but the switch will not turn off the remaining three lights. What did I do wrong... how do I fix it?...
Need help changing a two wire light switch to a fan and light switch.
[ 3 Answers ]
Wall switch box has two black wires and two white wires(spliced. New switch has black wire, red wire(light),yellow wire(fan), and green wire(ground). I think I need an independent wire for the fan and light. How?
Separate Fan light switch, fan switch and switch for can lights to one location
[ 2 Answers ]
I have A circuit that has 6 can lights and a fan light. The power is at the switch box I need to know how to wire the separate switches for the cans,and the light on the fan, and fan (That would be in a three gang switch box.) to one location. View more questions Search
Add your answer here.
|