Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Light Kit for Ceiling Fan
[ 2 Answers ]
I just bought I Home Essentials ceiling fan from K-MART and I wired the fan portion just fine. The wires were nice and color coded Black to black, red to red, white to white and green to bare copper for the ground wire. I turned on the power and it works fine. When I shut the power back off,...
Hampton Bay Ceiling fan light kit...
[ 7 Answers ]
I have a Hampton Bay ceiling fan installed and accidentally purchased one without a light in it. I need a light in the room that it is installed, but am having trouble as to which wires the light kit goes to. I opened the ceiling fan and it has a 6 or 8 pin connector, but not any loose wires to...
Ceiling fan/light
[ 9 Answers ]
I did away with the remote receiver and wish to use the wall switch only: I have a wall switch labeled "general purpose ceiling fan control - non solid state." Now this switch has one lever that operates the fan from off to high,medium, L1, L2. Below that lever is another lever that operates the...
Wiring a Ceiling Fan (w/light)
[ 5 Answers ]
I just moved into a new house and I'm installing ceiling fans. I've installed 4 other ceiling fans with no issues and on my last one I'm scratching my head. For each fan I'm installing a switch with a separate fan and light controller on the wall (side by side sliders). There are 3 wires on...
Ceiling Fan - Light kit removal
[ 1 Answers ]
I have a Hampton Bay ceiling fan - model CC 52HD. It currently has a light kit attached to it and I'd like to remove it, but need the "cap" that should fit over where the light kit currently is attached. Anyone know where I can find one of these? Are they standard? View more questions Search
|