I have a 15 amp circuit dedicated for 16 6" Halo IC recessed lights in my basement. To control these recessed lights, I installed one 3 way dimmer that controls 8 of the recessed light and the other 8 recessed lights are controlled by a regular single switch dimmer. Currently both dimmers work...

Hello, I installed a Leviton Motion Sensor Light Control (PR150). In the on position it works fine, the lights are one. But on auto it seems to only flicker the lights. They do not get to full brightness and they flash. It looks like the sensor is also acting weird as the LED light on the...

I need some help please! I just replaced 2 sets of 3 way toggle switches with 2 sets of 3-way dimmers (both in double electrical boxes). One set in the centerhall entranceway and the other set at the top of the stairway. WIth the upstairs light both dimmers light the light fine. With the...

Help me please. Have early 80s chev pu... Front L turn signal light comes on when brake is applied... Seen a few of these on the road... Could this be a chev problem? Or just an electrical problem? Is there an obvious answer? Thanks, David

I have a Hampton Bay Fan that has a fan, upper lighting and lower lighting with a remote model UC7078T. The remote works for the fan and lower lighting but not the upper lighting. This means the remote and fan are on the same frequency. I've confirmed that the bulbs are all good. Can't find a...