Ask Experts Questions for FREE Help !
Ask
    Eric H's Avatar
    Eric H Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2006, 05:07 PM
    Intermittent problem with Hampton Bay remote
    We have a Hampton Bay remote on our fan. It does work to control the light and fan... sometimes.

    The problem is we have to push the buttons numerous times before the fixture responds. The LED on the remote does illuminate when the buttons are pressed.

    Does anyone have any suggestions as to how fix this problem?

    Thank you!
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Nov 29, 2006, 10:50 PM
    If the LED lights every time a button is pressed, its not an issue with the keyboard. I would try a different frequency, and also make sure the remote has a clear signal path to the antenna.

    http://www.ceiling-fans-n-more.com/c...e-controls.php
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Fan Light/Fan Remote Problem [ 16 Answers ]

Hello, we have a Hampton Bay fan and my son dropped the remote and it stopped working. I changed the batteries and that didn't work. Now I asked someone at Home Depot what I needed to do. They instructed me to buy a new remote kit... I did however it came with a little grey box with 3 cords...

Hampton Bay Remote Video/fan Remote Control [ 16 Answers ]

I have a Hampton Bay Video & Fan Remote Control (Model #UR8050T). It has been working fine for about 2 years until it recently began malfunctioning. It still operates the television, but the use of the fan/light features has stopped working. It will not turn the fan on or off, and the light is...

Hampton Bay Remote [ 3 Answers ]

I purchased a remote for my Hampton Bay fan Let me start by saying IT IS NOT A DIP SWITCH ISSUE. For about 2 weeks the remote worked great. All of a sudden it quit working. Lights would not turn on, even if I used the pull cord. Fan would only change speed by fan cord. So, I took down...

Hampton Bay remote [ 3 Answers ]

Just installed a new fan w/ remote, lights ,upper and lower dim and brighten well with remote however fan does not operate at all. Wires from ceiling outlet are black, white, red and ground green. Instructions from mfg. show no connection for the red wire. I've tried it with the black and have...

View more questions Search