I'm trying to replace wall switch with a wall remote for a ceiling fan. Inside wall switch there's a black and red wire connected to switch. With a second red wire capped off. I was told that is for the ceiling. But I want to eliminate the wall switch. What do I do ? I installed the same fan in...

The fan and light work fine when I pull the chains.the ceiling wiring has 2 black wire's 1 red wire 2 copper and 1 green following the instrutions I connected the blue and back wire from the fan to the 2 black wires coming out of the ceiling, I connected the white wire from the fan to the 2 white...

I've had no luck with getting the wall remote on my Hampton Bay ceiling fan to work. I was able to get the fan to work with the wall switch, but once I change out the switch with the wall remote it doesn't work. The l.e.d. on the wall remote is not even lighting. There are 6 switches on the...

I recently purchased 2 flurescent ceiling lights to install where there have been none. I also installed a new wall switch wired from a baseboard outlet. My problem is that when the light is switched on it throws the circuit breaker. I've checked my wiring (bl. To bl. wh. To wh. and ground to...

I have a switch that controls an outside light. It is at the end of the run. I want to run an outlet inside the garage from that switch. I want the outlet to only have power when the switch is on. There are two black wires attached to the switch and the two white wires are connected with a wire nut...