Ask Experts Questions for FREE Help !
Ask
    bigguy55's Avatar
    bigguy55 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 18, 2011, 05:07 PM
    installing three gfi,s that gone bad. Green lights up, but no jucie.
    first to the left over kitchen sink, three wires== two blk, one white. Next one two
    blk and two white. And the bathroom, two blk, ad two white. Again... all green lights on, but no jucie.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Jan 18, 2011, 05:34 PM

    First, the title to your post says "Installing three GFI', thats gone bad" what does that mean?

    Second, are all of these GFIs on the same circuit or are is each on a different circuit?

    Third,
    over kitchen sink, three wires== two blk, one white
    Not logical, if there is two black there should be two white.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Existing Wiring/Installing a GFI - 12/3 [ 6 Answers ]

I have searched the net high and low and finally came to this site which has provided me with some interesting and informative reading. I have searched and come close to but not quite getting the answer to my question. Here it is. I have 12/3 wiring in my Kitchen(with split plugs...

Can I install a GFI for the cristmas lights? [ 3 Answers ]

Hi I want to have an outlet on the side of my house I guess it should be a GFI is this going to be OK to plug the cristmas lights to this?

Bad gfi? [ 4 Answers ]

My GFI tripped and won't reset. I took the load wires out and the GFI still won't reset. Ive used 2 different GFI's, is there a way both are bad? I have 110v at my line wires but less than 1v at my outlet. Can anyone help?

Installing GFI circuit breaker [ 1 Answers ]

I have installed a GFI circuit breaker and connected it to a simple circuit--a plug. When I plug anything into the plug, it trips the GFI interrupt. The circuit tests successfully, and works well if I replace that breaker with a non-GFI breaker. The GFI breaker is set up the same way as a...

Shared neutral GFI receptacles Fluorescent lamps and lights [ 1 Answers ]

Recently installed a 20 amp shared neutral circuit. One leg was 6 GFI receptacles, the other 8 lampholders with 13 amp Fluorescent lamps. Another 20 amp circuit had 5 4 foot (2) lamp cold weather fluorescent fixtures. Q1 Any code violations? Q2 Do they make a double GFI CB with a shared...

View more questions Search