The wire is 2 ft short and the box will be too low... can I splice another piece to it? And how do I do it

I currently have a 200 amp main breaker box in my house and is completely full of breakers. I would like to add dedicated 20amp circuit in my bathroom so I can install electric heated flooring below my tile. What would be the best way to add circuit? I assume I will need to add some sort of a...

I have a 98 year old house which has a main fuse box on the outside of the house. I want to install a new breaker box inside of the house in a closet. How do I install a breaker box inside and prepare it for the electric company to hook up to it?

I replaced an old fuse box with a new Siemens breaker box with 2 breakers in it. The main wire comes in the top and I connected the hot wire on the left side and the neutral wire on the right and the ground in the neutral bar on the top. Now for the 2 lines that come in, I connected each white...

Hello: I have a Sears Craftsman 6hp 150 psi 33 gallon compressor. Electrical measurements are 120v/15amps - basically meaning it could run on normal household current. However, when I start it up, after about 3 seconds, it shuts off. I tried using the dedicated outlets in my apartment,...