Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Lighting wiring
[ 0 Answers ]
Went to replace track lighting in kitchen. When we took the old light down several wires fell out of old light. It appears that other lights in the house are piggy backed off this wiring. The wiring that we have coming out of the ceiling is as follows. Two red wires that are wired together in a...
Ceiling light wiring-1 dimmer switch and 1 wall switch
[ 2 Answers ]
My new ceiling light has black,white and green wires. My ceiling box has 1 single black,1 copper, 2 white grouped together and 2black and a 1white grouped together. How do I connect my new light with only 3 wires to all the ceiling box wires. I have a dimmer switch on one side of the room and a...
Wiring double lighting switch, one source of power.
[ 0 Answers ]
I would like to wire a porch light to one switch and a ceiling rose to the other switch. I have three cables into the fitting wall box, each with a black wire, earth wire and red wire. Only one of the cables carries power on the red wire. I believe one of the cables is the switch wire...
Wiring rope lighting with a switch
[ 9 Answers ]
I have a rope light set I'd like to install behind a cornice in a tray ceiling. The clerk at Lowe's told me I'd need a GFCI outlet and a dimmer switch, which I bought. After reading the installation instructions on both the outlet and the switch it seems they're not the way to go. The dimmer...
X-10 Lighting With A 4 Way Switch
[ 2 Answers ]
I have an X10 dimmer module that I just got. I am currently replacing a 4 way switch. The current 4 way switch has 4 total wires. 2 wires go into the input and the other 2 go into the output. The X-10 module has 3 wires. How do I know where the 4 wires to the X-10 module go? The new X-10 module has... View more questions Search
|