Ask Experts Questions for FREE Help !
Ask
    texasmax's Avatar
    texasmax Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Jun 10, 2012, 08:56 AM
    Hunter Lugano fan- internal fuse?
    Hunter Lugano fan, model has remote and no pull chains with an integrated light fixture. It's on a wall switch, which is usually kept on, and we just operate fan and light with the remote.

    A few weeks ago, it stopped working completely. Neither the light nor fan turned on with the remote. Finally got around to troubleshooting it. Remote lit up when keys pressed, so the battery worked, but replaced it anyway, still no go. Followed the dip switch setting change from the manual (remote has the dip switches, the fan assembly learns it and doesn't have switch settings on its own)- turned power off at fuse, changed dip switches, turned poser back on and 3-2-1 on fan speed buttons. Checked and the fan does have 120VAC at the canopy wiring pigtails when the wall switch is on.

    Anyone know if the Lugano has an internal fuse somewhere? Is there anything else I can try?

    Thanks!
    texasmax's Avatar
    texasmax Posts: 5, Reputation: 1
    New Member
    		  
    #2

    Jun 12, 2012, 07:57 AM
    Finally got Hunter tech support on the phone, the rep was a little short with me but was confident that the remote receiver needed to be replaced. There was never any humming/buzzing or otherwise from the motor, and I don't know if that tells me anything about the state of the motor, but ordered the part with them on the phone so fingers crossed...
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #3

    Jun 12, 2012, 08:17 AM
    Suggest removing remote receiver and connecting fan and/or light directly to power if possible.

    If fan runs or light lights that would confirm that the remote is faulty.
    texasmax's Avatar
    texasmax Posts: 5, Reputation: 1
    New Member
    		  
    #4

    Jun 12, 2012, 09:42 AM
    Harold- thank you- will give that a try- would you happen to know if the receiver is at the top of the assembly (figuring it should be as it sits between power and motor)?

    Thanks!
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #5

    Jun 12, 2012, 10:29 AM
    Almost every receiver I have seen is in the canopy at the ceiling mount
    texasmax's Avatar
    texasmax Posts: 5, Reputation: 1
    New Member
    		  
    #6

    Jun 12, 2012, 12:47 PM
    Fantastic- thank you.
    texasmax's Avatar
    texasmax Posts: 5, Reputation: 1
    New Member
    		  
    #7

    Jun 14, 2012, 06:29 PM
    Package showed up today- for reference, part was labeled Casablanca Versa-Touch 2, model number W72. Replacement was a breeze, pun intended!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Connecting the Hunter thermostat is popping the fuse [ 1 Answers ]

When I connect the 24V power wire to Rc terminal on my Hunter Thermostat Model 44660, it is popping the fuse on the control board. However, if the 24V wire is connected to RH, there is no problem and the heat works fine. Can someone, please tell me what could be wrong. I have verified the wiring...

Trying to install a new hunter ceiling fan and a new hunter switch fan and dimmer in [ 1 Answers ]

Trying to install a new hunter ceiling fan and a new hunter switch fan and dimmer in one... I can get the light to work on the dimmer and or the fan and light on the dimmer but not the fan to work on the fan switch... I don't know where the blue wire coming out of the switch goes ...

What the internal fuse value is in the 800watt Hinari Lifestyle microwave [ 2 Answers ]

The fuse is about the same diameter as a normal 13amp apliance fuse. In this case it has a white body with metal ends and is mounted on a board above the incoming mains cable.

Hunter Stafford fan, Hunter remote 27157 and two wall switches [ 3 Answers ]

From the ceiling is a tan, a red, a black and a ground that go to two switches on the wall. The fan has a black, a black with white, a ground and a white. The remote has a black, a red, two whites and a black with white stripe. Which do you connect to which? Thanks.

Hunter fan when light is switched on the fuse is stripping [ 1 Answers ]

I bought hunter fan and fixed it to ceiling.When I switched on fan is working but when I turned my light switch on my entire bedroom unit fuse is stripping off.Please help what should I do. Thanks----

View more questions Search