Ask Experts Questions for FREE Help !
Ask
    rrothman's Avatar
    rrothman Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 7, 2009, 05:15 PM
    HUNTER LIGHT SWITCH (has fan and light control)
    Switch for light control broke off. Having trouble taking off wall light switch cover. I removed the skrews but the switch cover doesn't pry off wall. Thanks.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Oct 7, 2009, 06:37 PM

    Are you talking about a wall mounted swicth in a box?
    rrothman's Avatar
    rrothman Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 7, 2009, 07:11 PM

    Don't know. I didn't put it up. It just look like a cover over a wall mount cover over a sliding switch (there 's a slide for the light control and fan control). Problem is the cover doesn't seem to come off and I need to replace it due to the slide control for the light breaking. Maybe there's a box behind the wall cover?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    Oct 8, 2009, 02:16 PM

    Most likely there is a box and the cover screws onto the box or it is attached to the switch itself, usually at least 2 screws. Try prying under a corner to pop it.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #5

    Oct 9, 2009, 12:52 PM

    Check with Hunter Fan - Ceiling Fans, Air Purifiers, Humidifiers, Thermostats they are usually good at following up on their products if you call them.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Help with wiring a HUNTER Ceiling Fan and Light Control [ 16 Answers ]

I am currently replacing a light switch with a ceiling fan and light control. The description of what I am replacing with is: http://www.littmanbros.com/pd_hunter_27182.cfm I currently have a ceiling fan with a light kit (and it too high off the ground to have the fan controlled by a pull...

Hunter fan and light switch model 27182 [ 6 Answers ]

Hello, here is my problem... I'm replacing an old single light/fan switch from with a new Hunter model 27182 combo switch. Here is what I have... from the ceiling my wiring is as follows and how it is connected to my new fan. White/white, black/black, red/blue, and two green and 1 bare wire wired...

Replacement Hunter Fan/Light wall switch [ 1 Answers ]

I have a hunter 1912 Mission Bronze 54" fan with 2 lights, one above and one below the blades. The wall switch control has separate dimmer buttons for each light and hi, med, low, and off for the fan. Since a lightning strike the fan only works on hi or off but not on med or low. The light...

Battery replacement for hunter light switch. [ 3 Answers ]

Hello, I recently purchased a new home. After a few months the light on the deck has stopped working. The light and fan still work but not with the wall switch. At first I thought I may have to replace it due to moisture. After reading about the Hunter light switch, seems there may be a battery...

Light switch won't control light [ 2 Answers ]

I took down a ceiling fan and connected a new chandelier. Very basic white from light to white in ceiling, black from light to black from ceiling, ground to ground. There is also a pink wire from ceiling that I just capped. When I turned the fuse back on the light came on but the wall switches...

View more questions Search