Ask Experts Questions for FREE Help !
Ask
    baladent's Avatar
    baladent Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 14, 2006, 06:06 PM
    Hunter fan switch ---won't stop
    Just replaced a hunter 3 way fan switch. Swear I matched up the wires correctly. The light works properly off a second pull chain, and the wall switch cuts power to both fan and light. The fan definitely operates on 3 speeds, BUT... the off position on the pull chain, doesn't stop the fan completely. Still get some slow, powered rotation. Thinking it could be a bad switch, but unlikely. Maybe getting power from a short in the mess of wires tucked in there. Any help appreciated. Thanks
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Oct 14, 2006, 08:08 PM
    I'm thinking you didn't get the correct replacement pullchain. There are few different types of 3 speed pullchains. Try a different type, or contact Hunter.

    http://www.ceiling-fans-n-more.com/c...and-repair.php
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hunter Fan runs very slowly [ 14 Answers ]

I have installed a Hunter with remote control (Model 27185). Everything works including the fan. When I set the fan to fast using the remote it runs at the slowest speed of my other Hunter fan. When I set it to slow it barely moves if at all. Initially I did not have the pull switch set to...

Hunter fan to install [ 1 Answers ]

Opened perfectly good operting hunter fan to install hampton remote... I am lost. (hamptom remote is to be compatible with hunter fan?? ) From ceiling I hv blk/red/white & grnd Remote has blk to motor... blue (light) to motor and white to motor Only...

Hunter Contintental fan lights overheat? [ 6 Answers ]

Yesterday I had an electrician install trhee fans all Hunters. The 44" Continental Hunter fan (model 23843) with the 4-light fixture seems to generate excessive heat (very hot to touch) after a few minutes of turning on the lights. I have used both 40 and 60 watt bulbs. My quetion - is this...

Trouble with ceiling fan on a dual fan/light dimmer switch [ 1 Answers ]

I just installed a new Harbor Breeze ceiling fan and dual fan/light dimmer, also from Harbor Breeze. Unfortunately, now I'm scratching my head... Do I have a bad dimmer switch? Here's the problem: 1. The light will turn on only when the fan speed on the wall switch is set to high. 2. When...

Hunter Fan Receiver [ 1 Answers ]

I have a Hunter fan with a remote that is a discontinued model. The light only stays on for awhile and then shuts off but the Fan works fine. The Hunter help line said that the receiver was probably bad but no replacement is available but could sell me a new fan at a steep discount. Why can't I buy...

View more questions Search