Ask Experts Questions for FREE Help !
Ask
    Bobby Lane's Avatar
    Bobby Lane Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 27, 2015, 08:12 AM
    How to reassemble a zing ear pull chain electrical component for ceiling fan
    2 lights in ceiling fan went out. I suspect it is the zing ear pull chain electrical component.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Sep 27, 2015, 08:47 AM
    If the switch went out, then all of the lights would fail, unless the lights are segmented (1st. Pull turns two lights on, 2nd. Pull turns two more lights on).

    Otherwise, I would spend some time testing the connector and wiring to verify that it is in fact the switch and not just the bulbs.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing a 3 speed ceiling fan zing ear [ 2 Answers ]

I have a hunter ceiling fan. The fan chain switch went. It was a zing ear #ZE-268S6. I replaced it with a Westinghouse zing ear #77288. Replaced wires as follows L-black. 1-gray. 2-brown. 3-green. Now the fan only has high & medium. And does not shut off with the pull chain I need to...

How to reassemble Zing Ear pull chain switch [ 22 Answers ]

Appliance: Hunter ceiling fan; Problem: Zing Ear pull chain switch #ZE-268S6 The pull chain broke inside the switch. I replaced the broken chain but then Couldn't put the switch back together correctly. The switch consists of two halves: one side with the electrical connections, Which appear...

Zing ear pull chain switch [ 2 Answers ]

I need to replace the 3-speed fan switch(Zing Ear, ZE-208 S6) in my ceiling fan. Where can I purchase, or order, an exact duplicate? Price?

Ceiling fan replacement switch, zing ear a05 possible candidate [ 3 Answers ]

As most on here, one of my ceiling fan's speed control switch exploded, linking to the inevitable run to Lowe's only to find out that the standard switch is a no go. Which in turn lead me here, I have tested the wires to see what combinations got me where and here are my results (mind you, w/ the...

Replacing the zing ear switch in a ceiling fan [ 2 Answers ]

I have found the correct zing ear switch to replace the existing one , in which the chain broke off. I was able to remove the 4 wires from the old switch by placing a small flat head screwdriver in each slot and pulling each wire. How do I insert the 4 wires into the new switch? Do I need to...

View more questions Search