Ask Experts Questions for FREE Help !
Ask
    stormed2's Avatar
    stormed2 Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 10, 2013, 10:24 PM
    How to power a new light and switch
    OK all, hope you can help.

    I'm updating a house to move into. I'm knocking out a wall and building a walk in closet. I need to install a basic track light in the closet and run a switch to it. Is it possible to tap into a nearby outlet to get my hot to the switch and then from the switch to the light source? Any other options would be appreciated.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Dec 11, 2013, 06:28 AM
    Yes, you can run a cable from the outlet to the switch and a cable from the switch to the light fixture.

    You could also run a cable from the outlet to the light fixture and then run a cable from the light fixture to the switch for a switch loop.

    Which ever is easier.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Power coming from the light, would like to add another light and switch. [ 2 Answers ]

I have a ceiling light in the garage. I opened up the switch and there are only three wires; black, white, and ground. I'm assuming this means that the power is coming from the light. I would like to add an outside light and and have it controlled with a second switch powered from the first. I...

Power Into Light - Switch Leg Down to Switch [ 1 Answers ]

Power Into Light - Switch Leg Down to Switch

New dimmer switch will not dim light - taking power from 3 way switch [ 2 Answers ]

New dimmer switch will not dim light - I am trying to hook up a dimmer switch in a electrical box that already contains a three way switch. I am trying to take power from the three way switch to power the new dimmer and light. The way it is hooked up now the new light works but will not dim with...

How to install and power a Ceiling Light from a light switch? [ 1 Answers ]

I need to install a ceiling light in our bedroom. I have a single light switch and four outlets. One of the outlets is operated by the light switch. I have the following wires coming into the light switch box: three white wires/capped, three copper ground, three black/capped with a fourth pig...

Little or no power to light switch [ 7 Answers ]

Light above kitchen sink stopped working a few days ago. Tried a new bulb, that didn't help. Checked the breaker; it was not tripped, but I cycled off and on it anyway. That didn't help. Loosened fixture and put neon tester on wires. It showed no power. Took switch plate cover off and put...


View more questions Search