Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
No Power to Plugs When circuit breaker is on
[ 5 Answers ]
My house was built in 1958, I have the original breaker box, and a new one. The old breaker box is now a sub-panel (all this work was done before I moved in) I have been living here 2 years, and no problems. Today the plugs in the house do not work, but all the breakers are on. I also found out...
Wiring 6 pot lights with 2 plugs
[ 1 Answers ]
Have 14-2 wire from panel to switch box heading off to si pot lights and 2 plug boxes all of 14-2 wire how do I tie all these wires together in the box?
Can I have 21 recepticals, 10 lights, 3 fans, and 3 (240v) plugs on 100 amp breaker?
[ 4 Answers ]
I just bought a 100 amp breaker panel to replace an old fuse panel. The thing is, after I figured up everything I wanted in the shop, (21 receps. 10 lights, 8 switches{4-3way switches and 4-single}, 3 fans{2 w/ lights}, and 3-(240v)plugs), I'm now not sure if I can pull all them on a 100 amp...
98 Civic lights pulsing after replacing ignition coil and plugs/ wires
[ 3 Answers ]
1998 Honda Civic EX coupe, 222K miles, original owner, timing belts/ water pumps changed every 100K Car just stopped while driving Sunday, we did some research and decided to replace the ignition coil... my brother is mechanically inclined but not familiar with Hondas. So he replaced it, and...
GFI Plug Works, Plugs in Circuit Don't
[ 1 Answers ]
I have a GFI plug in my downstairs bathroom that controls three plugs upstairs: guest bathroom, and two in my master bathroom. My wife tripped the plug in the master bathroom with her hair dryer. I went to reset the GFI plug in the downstairs bathroom, but it was not tripped. My wife was still... View more questions Search
|