Ask Experts Questions for FREE Help !
Ask
    bomb squad's Avatar
    bomb squad Posts: 3, Reputation: 1
    New Member
     
    #1

    Mar 15, 2013, 04:33 AM
    How many amps per wire size
    What r the points in amps which require a increase in wire size? Isn't there somesort of chart?
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #2

    Mar 15, 2013, 04:45 AM
    I hope you aren't wiring anything in your house if you have to ask that question...

    Wiring needs to be inspected and it has to meet local codes. If there were No permits if needed and no inspection and your house burns down... your insurance can legally refuse to pay off on the claim.


    There is more to sizing wire for an application than load and wire size...

    The National Electrical Code book is what you are looking for.
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #3

    Mar 15, 2013, 05:41 AM
    By code, the smallest branch circuit in a residence is 15 amp. This requires #14 AWG Copper.

    20 amp uses #12 AWG, 30 amp uses #10 AWG.

    However as Smoothy stated, there is much more to consider for example the Type of cable, number of conductors needed, temperature of the connecting points, etc.

    What are you trying to wire?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

450 amps what wire size [ 3 Answers ]

What size conductors are needed for a 450 amp,three phase,600 volt electrical system,these conductors would be for the primary side of a three phase transformer

What Size Wire Do I Need to Carry 100 Amps [ 3 Answers ]

If I have 100 amps at 480 what will I have if I transfom it down to 208 three phase?

What size alluminum wire do I need to carry 100 amps for 300'max 220 v [ 10 Answers ]

220 volt max , mostly 110 a compressor , welder , tools , lights ,typical hobby garagel 350' panel to panel (from house to garage)

Adding stage lighting and amps to sound system. Wire size questions [ 5 Answers ]

Hello. We are installing a new stage lighting system and some additional amplifiers to our sound system. The sound and lighting techs have asked for ten 40 amp circuits. I personally think this is too many circuits for what they are installing, but they want room for future expansion. If I am...


View more questions Search