 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How do you sync a hamilton bay remote to the base?
I have 2 fans and 2 remotes both remotes would work for both fans. So I switched 1 remote to the 1 position inc the base it at 1. Now that remote only works for that fan. I tried the same with the other fan and remote on all positions and it doesn't work. So I switched it back to original position and still won't work. So I looked for a reset, to no avail. So it must have to sync to the base. I'm renting so there are no manuals. Please help!!
|
||||
Check out some similar questions!
I have had this ceiling fan for about 6 years. Just last night I used the remote to turn off the light and fan, this morning it just stopped working. I replaced the battery, but still cannot get the remote to turn the light nor fan on. There's a light that lights up red when the remote is...
I have a hamilton bay remote ceiling fan and cannot get the lens cap off to replace burnt light bulbs. It turns half way and then stops.
Before I break the darn thing, can you tell me if the back panel comes off or if I have to unscrew the top and bottom screws?
I need to order a reverse ceiling switch for my fan, where can I order it from. Jim
I have Hamilton Bay Track Head lights. My light went out and when I tried to change it I was only able to take off the retainer ring, lens and then I could see the light bulb under a glass. How do I get that glass off to get to the light bulb or does the whole light bulb and glass come out in one...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
