Ask Experts Questions for FREE Help !
Ask
    halley's Avatar
    halley Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 27, 2008, 11:57 AM
    How do you install a 220v electric stove plug?
    Hello everybody.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Jun 27, 2008, 12:58 PM
    Hello, how about some more details?
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #3

    Jun 27, 2008, 01:20 PM
    Now-a-days, there is no 220. Household voltages are 120 and 240.

    You really need to help us here. We need to know the following:

    What is the amperage of the stove?
    Is this a fresh install or have you had some other cooking appliance.
    Are you going from 3 wire to four wire?

    What type of receptacle are you trying to use? In wall or surface mounted.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

220v dryer plug different than 220v wall outlet [ 16 Answers ]

Dryer has 2 flat and 1 round prong, outlet has 3 flat prongs. Is there an adapter for that? Also do they make a 220v extension cord or a two into one adapter for a 220v?

Electric stove install wire size/type [ 4 Answers ]

I am installing a Peerless electric stove the plate on it says " Three wire 120/208 volt 60 cycle ac , wattage 8800. I have a GE powermark gold loadcenter with about 10 empty blanks for breakers. The loadcenter is about 75 to 80 feet from the stove location. What size/type wire should I use? What...

Electric stove [ 1 Answers ]

I have an electric stove by Kenmore. What causes the oven to not go off when you turn it off and only get hotter and hotter no matter what temperature you put it on? Instructions on a cake I was cooking said to preheat oven to 375. I did that but notice that the oven was too hot to put the cake...

Electric stove [ 1 Answers ]

I have a gas stove which is a 20 amps and I have it plugged in to the wall. A few days ago I noticed that there was a pop noise in the kitchen and the stove went out. There is no electricity where I had the stove plugged in. I went outside and switched the breaker off and on that applied to that...

220v 50a welder, 220v 30a dryer plug [ 1 Answers ]

I just got an arc welder that is 220v 50a. I thought I could plug it into the 220v receptacle in my garage, not realizing how many different types of 220v plugs and amperages there are. The receptacle in my garage turns out to be a 220v 30a dryer plug. My question is can I just change the...


View more questions Search