Ask Experts Questions for FREE Help !
Ask
    dells's Avatar
    dells Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 15, 2011, 11:00 AM
    How do connect a intermatic CT 2000 timer to a electric motor?
    I am replacing a paragon percentage timer with a intermatic CT2000 percentage timer not sure where the white and black wires in the timer connect.
    Chuck
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Mar 15, 2011, 11:13 AM

    Went to Intermatic, Couldn't find the Manual for the CT 2000, did find one for the CT1000, may be the same or something you can work with:
    http://www.intermatic.com/~/media/fi...20english.ashx

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Intermatic t101 timer troubleshooting [ 5 Answers ]

Thanks in advance to anyone kind enough to answer: in re: T101 --if the manual lever is in the "on" position, does that mean the automatic functions are over-ridden and therefore the T101 is "out of the loop" until that switch is changed to the "off" position? --can the T101 be functional (eg,...

Intermatic T104P3 timer not working. [ 3 Answers ]

After not using timer for 2 months, clock works and pump runs, but I cannot turn OFF pump through timer. Neither the manual switch nor dial switch work. Any suggestions?

Intermatic t103 timer hook up [ 1 Answers ]

Hi I just installed a Intermatic T103 timer to my water heater. It doesn't seem to be working. I hooked it up two different ways and still the timer stays still. I first hooked it up as the spec. lines 1 and 3 were my line and lines 2 and 4 were my load nothing. Than I tried because it is a 220v...

Intermatic T101 timer will not turn on [ 3 Answers ]

I have a Intermatic T101 timer which is only used once a day (evening). It is turned on at 7:00PM and turned off at 10:30PM automatically. The problem is it has stopped turning on by the tripper. I replaced the on tripper but it still does not work. I can turn it on manually. It does turn off...

Proper Wiring for Intermatic Timer [ 1 Answers ]

I just replaced simple switch that consisted of a hot in and load out to the filter plug (while the remainder of the wires including ground go directly to the plug) with a double pole/single throw timer. The manual switch works, but the actual timer has no power. I simply took the live wire and...


View more questions Search