?? Hi I have a hampton bay sidewinder ceiling fan that came with a wall mount remote control. I wanted to have a hand held remote control, so went and purchased a remote control that came with its own receiver (hunter). I replaced the original receiver with the new receiver. The hand held...

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

I am trying to install a switch that controls both the ceiling fan with 3 speeds and a dimmer switch all in one unit for a hunter ceiling fan. At the wall switch there is a black wire which is always hot, a red and a ground. At the ceiling, where I removed a light fixture, there is a black, red,...

I am trying to install a Hampton Bay Wall Remote Control that transmits a signal to a receiver that I will install behind the Ceiling Fan assembly. Problem: Remote instructions state to connect the 2 Black wires from the wall switch to the new Remote switch. The wall switch has a Red and a...

Have a hampton bay fan w/ One white wire-neutral One blue- lamp One black- fan In junction box have 2 capped blacks 2 single whites