 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Harbor Breeze Combination Fan and Light Control tripping?
Hi,
I have a Harbor breeze Combination Fan and Light Control (model WC-100L). I have 2 installed and after a couple of years they both went out. The red power light didn't light up when buttons were pressed (note: this is hardwired into the house electrical, not battery operated). I replaced both units a week or so ago, and now the 1 has stopped again (the other is working good still). Does anyone know if there is some sort of circuit in the unit that can trip? Is there any way to reset this? Any other thoughts why these suddenly stop? BTW, I have swap this unit out, and the fan/light work with a normal switch. Any help greatly appreciated. Rob |
||||
Check out some similar questions!
My harbor breeze fan light does not work with the remote or wall control. We have replaced the receiver, rehooked it up to all the wires coming from the house but only the fan works. We can control the fan speed. When we press the light button on the wall and remote it flashes red. Please...
I have two Harbor Breeze fans. Both have their own remote. They were in the house when we bought it in 2006. The lightbulbs burned out (as they do occasionally) and we replaced them as normal. Both remote batteries needed to be replaced as well (9v). So replaced those as normal as well. Now...
I recently bought a Harbor breeze universal ceiling fan and light wall control for my existing wired fan. The existing wiring was two on/off switches (1 for the fan, one for the lights). The cable used in each case has a black wire, a gray wire, and a ground wire. When I hooked it up, the light...
I have a Harbor Breeze ceiling fan with remote control dimmer for the light and 3-setting fan control. My halogen light burned out. When I replaced the bulb with the same specs, the dimming function on the remote control no longer worked (though the fan settings on the remote control still work...
I have read the other posts on this subject, but my problem is a bit different: The light on/off and dimmer is working fine from the remote, but the fan speed is stuck on High, and the fan can't be turned off (except from the wall switch). So, the remote is working, somewhat. Any advice? ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
