 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Harbor Breeze C/Fan remote trouble
I have recently installed three Harbor Breeze ceiling fans (Grand Lodge) and one of the fans mysteriously turns itself on. The fans are installed under a patio cover with about 20' separating each fan. My client wanted all three fans operated with one remote so the receivers/remotes are all using the same jumper settings. One of the fans comes on by itself, at various times, after being shut off. The remote works fine for all of the fans and I have no problem turning the fan off once it comes on. I decided to change the receiver/jumper setting for the one fan but after doing that... the fan would not respond to the new setting but STILL responds to the original remote with the original setting regardless of the fact that the receiver jumpers are not set at the original configuration!! It's spooky...
Anybody out there have any suggestions? |
||||
|
||||
|
If changing the frequency does not work I would take the fan back and see if you have better luck with a new fan. You can also try shielding the receiver to make it less sensitive. There really aren't many options with remotes.
Ceiling fan remote controls - help and FAQ- Ceiling Fans N More |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I just puchased a Harbor Breeze ceiling fan w/ 2 lights(1 up) and remote control. I have 4 wires(black,white.red and bare) out of ceiling box. Remote has black and white on one side and black,white,blue,and orange on other which match those coming from fan. Do I need red from box to operate other...
I have recently purchased 4 of the above ceiling fans with remotes for a new house. In 1 of the bedrooms I can control the light from the switch but in the other 3 bedrooms I can only control the light via the remote. Any ideas? Thanks!
:confused: ::confused: How do i change the frequency of a fan remote. A 2nd fan is responding to the remote. Thanks, Mickey Harbor breeze--rc103l0
I have recently installed a Harbor Breeze fan/light with remote. It is operated by a 3way switch. Each time the switch is turned on, the fan and/or light has to be "manually" turned on with the remote, even though the light was "on" when the switch was turned off. Appears to be no memory in the ...
I pulled the fan from another room where it was working fine to put it in another bedroom. When I hook up the wiring according to the receiver I get nothing from the fan. When I bypasseb the remote receiver I got only the fan spinning and the lights wouldn't turn on. I didn't note the wiring when I...
View more questions Search
|
