Ask Experts Questions for FREE Help !
Ask
    diggidy_d's Avatar
    diggidy_d Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 5, 2005, 01:12 PM
    Hampton Bay Wireless Remote Installation
    I've just installed a Hampton Bay Reddington IV ceiling fan, and I'm not sure about the directions to install the wireless remote. The remote has five wires coming out of it. 2 white (AC IN N, MOTOR N), 2 black (AC IN L, MOTOR L) and 1 blue (FOR LIGHT). However, I've only got 3 wires coming out of my ceiling box (I'm replacing a fan that had no remote), white, black and blue.

    With only those wires, it would seem that the two white wires and two black wires for the receiver would have to be touching? I've tried that, and it doesn't work... even though it doesn't affect the operation of the fan.

    I've checked the dip switches, and the code setting matches my remote, and I've also made sure that the fan's manual settings are how they should be as listed in the manual. Please help... I hate using the chains :(
    Tearflop's Avatar
    Tearflop Posts: 4, Reputation: 1
    New Member
    		  
    #2

    Oct 1, 2005, 06:41 PM
    The transmitter has the 5 wires the AC black & white go to the power and the black & white Motor go to the black & white wires from the fan,.

    Tearflop
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Wireless Remote [ 5 Answers ]

I have a Hampton Bay ceiling fan and broke the remote control, is there anybody out there who knows where I can purchase another one? Also, if there is someone out there who is familiar with the unit, perhaps you can tell me how to switch off the fan without using the remote. The wall switch...

Hampton Bay Remote Control Installation [ 2 Answers ]

I am trying to understand the installation procedures for installing a remote control into a Hampton Bay (Mod. 197 878) Grammercy Fan. The reomote receiver has a total of 6 wires. One is the antenna wire, and that speaks for itself. There are black, white and blue wires on one side, and I...

Hampton bay ceiling fan installation with remote [ 2 Answers ]

Hi There, So I successfully installed two ceiling fans that did not have remote controls. My house is prewired for the ceiling fan and it took a lot of re-reading of the instruction manual before I figured out that the extra wire (red) went to the blue fan wire, black to black, white to white,...

Hampton bay fan wireless remote [ 1 Answers ]

Hello all! I have a hampton bay ceiling fan with a wireless remote control. I'm not sure of the model# of the fan, but the remote has a model # on the back of it that is: UC7030T. Every button on the remote works except for the light dimmer button. It doesn't even illuminate the red led indicator...

View more questions Search