Ask Experts Questions for FREE Help !
Ask
    itwoman's Avatar
    itwoman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 20, 2009, 05:38 AM
    Hampton Bay track lighting End Power Feed
    Folks,
    I bought a Hampton a 3 light Track Lighting Kit (724 491) and a Track Lighting End Power Feed with Cord and Switch to convert it for wall plug-in.
    The box for the End Power Feed says it works with EC and HB series track, and my lighting kit has EC76207 track.

    I have not been able to get the Power Feed unit to insert into the track. Any suggesions?

    I took everything back to Home Depot to see if they could help and they couldn't figure out how to make it work. Can you help>

    Thanks
    Fritzi

Check out some similar questions!

Hampton Bay track Lighting [ 13 Answers ]

I have installed Hampton Bay track lighting in five rooms of my house. They are all the low voltage (12 volt) type. In all I have 52 light heads. I had to rewire some of the 90 degree track connectors that came wired wrong from the factory. I am now experiencing the problem that when a bulb...

Hampton bay track lighting kit [ 1 Answers ]

I have installed two sets of hampton bay track lighting model hd529093 in my den. And they are controlled by 2 light swithes. I am trying to install a dimmer on them. I have lutron dimmer model fae1v500m muti-location 500w andfa603adtl for the second switch. I am not able to make lights work with...

Hampton Bay Track Lighting [ 1 Answers ]

I am installing Hampton Bay track lighting in my kitchen. I am wanting to use the H design with two parallel tracks. Using two 4' bars on each side connected with a 2' bar in the middle. We have one side hooked up but when we tried to put the T connector in the other side it would not fit. Do...

Hampton bay track lighting [ 1 Answers ]

We just installed a hampton by track and bought Halo by Laser lights. Nothing is working. Are they not combatible? They are both "3-wire" systems, (I believe called "H" systems) with 2 wires on one side and one on the other.

Hampton Bay Track Lighting [ 1 Answers ]

I have Hampton Bay track lighting in a bathroom and now two of the heads will not work, I have replaced with new heads and still will not work, can move the last two heads that do work to any place on the track and they work. Have replaced bulbs with one that have confirmed working.

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.