 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hampton Bay ceiling fan remote control troubles
For the last several years my ceiling fan remotes has been working fine. Lately two ceiling fan remotes started given me trouble. At the same time, remote 1 stop working and remote 2 worked but the light stays on. In addition, it appears that I am having some interference from a neighbor's remote setting. Because remote 2 fan and light turns on/off without any help from me. I have tried resetting the remote control dip switch on remote 2 and on the fan. In the beginning, this appeared to have worked. Remote 1 started to work again even though remote 2 light stayed on. After about three or four days the same things happen all over again, right down to the fan/light being controlled by someone else. I think this is why the light on remote 2 did not go off when not being used because it is still receiving interference from somewhere in the neighborhood. I have been through all 16-dip setting and the light on remote 2 continues to stay on. I have a 10 foot vaulted ceiling; I do not want to keep going through this. I do not think that a new remote will correct this problem if it is being caused by an outside source. Please advice
|
||||
Check out some similar questions!
Hi, My son recently burned remote control of my bedroom fan, so I called the Hampton bay company and they mailed me identical remote control as original I had, anyway, I put new battery but it does not respond at all, did the codes got reset? How do I know? The remote works when battery put in,...
Can you tell me where I can purchase a ceiling fan remote control for a Hampton Bay ceiling fan?
We recently purchased a Hampton Bay ceiling fan from Home Depot model number 52-amd We wish to change the direction of the turn of the fan , and so far the remote for that command is not reacting. What is the oproblem and is there a customer service to Hampton Bay. They do not have one...
I need the instructions of the Hampton Bay ceiling fan with remote control so that I can replace the electric light bulb and replace the blades Thank you Antonia
I installed a ceiling fan 3 years back. Wiring would have been difficult as it is located in a cathedral ceiling and walls didn't have any existing electrical wires. I used a remote control for the light and fan. Recently, it stopped working. I changed the battery and the remote control shows...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
