 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hampton bay ceiling fan light partially working
We had 2 identical Hampton Bay ceiling fan with 4 lamp lights installed in our rental property. Both only have 2 of the 4 lights working. One of them had all 4 lights working for a couple months, but then 2 quit. The other has only had 2 of the 4 working since it was installed. The fan works fine. Trying to figure out if it's a possible wiring issue or if it's just strange luck to have 2 fans with this issue.
|
||||
Check out some similar questions!
Both my ceiling fan and lights are working however when you pull the switch to turn off the light it throws a breaker! My husband has checked the wiring and all seems to be correct. Any soulutions?
I have tried to install a Hampton Bay ceiling fan with light kit. The home is an older one, with both supply wires in the ceiling being sheathed in black cloth. When I made the connections, the lights work, but the fan does not. Any ideas were I may have gone wrong?
I flipped on the Hampton Bay Ceiling fan light switch and heard a pop and the light no loger works. Th fan works fine
Windward II Unit, has fan and light. The fan works but the light now does not. Replaced bulb, replaced ballast, replaced batteries in remote... slowly running out of ideas. The remote still works for the fan. Read on another post something about toggling the remote. I assume if the fan works the...
The ceiling fan works as a fan, but the light fixture does not work. Worked for prior 3 years. Changed bulb when went out, but no luck. Tried the new bulb in my other fan to make sure it was not faulty. It was fine. The remote works.. again used the remote on the other identical fan. Need to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
