Ask Experts Questions for FREE Help !
Ask
    jerilynharris's Avatar
    jerilynharris Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 5, 2007, 10:05 AM
    Hamilton Bay Ceiling fan and light
    I have a great Hamilton Bay Ceiling fan and light.
    Something has happened to it, and I can not get the light to turn off.
    The fan works fine, but the only way I can turn off the light is to unplug it from the wall.
    What is wrong with it? Please email your answer to [email protected]
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Mar 5, 2007, 11:33 AM
    Is it a remote fan or does it use pullchains? How was the light previously controlled?
    jerilynharris's Avatar
    jerilynharris Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Mar 5, 2007, 01:09 PM
    Quote Originally Posted by ceilingfanrepair
    Is it a remote fan or does it use pullchains? How was the light previously controlled?

    Answer to question above:
    The light and fan are remotely controlled - the remotes still work well for the fan but the "light" buttons will not turn off the light. I must unplug the unit to turn off the light
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Mar 6, 2007, 01:49 PM
    Does the LED still flash when you push the light buttons? If so, the receiver is bad.

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More
    msanne2u's Avatar
    msanne2u Posts: 1, Reputation: 1
    New Member
    		  
    #5

    May 24, 2008, 06:26 AM
    Hello I have a remote control hamilton beach ceiling fan all of a sudden after 2 years both the fan and light stopped working. I checked the wall switch and there's power I replaced the battery and the red light comes on and I pulled the hub off the ceiling fan and all wires are connnected and I reset the switch from the breaker box----whats going on?? HELP!!
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #6

    May 27, 2008, 12:24 PM
    You probably need to replace the receiver. Try changing the frequency of the fan and remote, if that doesn't work, contact the manufacturer for replacement parts.

    Ceiling fan remote controls - help and FAQ- Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay ceiling fan light fixture stopped working but fan still works why? [ 14 Answers ]

New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:

Hamilton Bay Model AC 552 ceiling fan speed switch replacement [ 6 Answers ]

My pull chain broke on my fan speed switch. I replaced the switch with a 3-4 wire switch. I matches the black, brown. Grey and purlpe wire with the same connect number on the new switch that they had on the old switch. I believe this is a three speed fan. The fan now runs but it can not be turned...

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Hamilton Bay Ceiling Fan Remote [ 4 Answers ]

I have had this ceiling fan for about 6 years. Just last night I used the remote to turn off the light and fan, this morning it just stopped working. I replaced the battery, but still cannot get the remote to turn the light nor fan on. There's a light that lights up red when the remote is...

Hamilton Bay Caswyck Ceiling Fan [ 1 Answers ]

We just purchased a 54" Hamilton Bay Caswyck ceiling fan and would like to know what is the highest watt halogen bulb we can use. It came with a 100 watt halogen bulb but would like it a little brighter. I can't find anything in the owner's manual of how high you can use. Do you have any answer's...

View more questions Search