I have a generator with a 240v main breaker. I want to step down to wire 2 120v outlets. I have ran the wire from the main breaker to my sub panel (50 amp GFI), connected the neutral to the ground bar and the pigtail out of the double pole breaker to the neutral bar as well as the neutral to the...

Greetings all! I have a 15 amp GFI breaker that trips anytime something is plugged into any of the outlets on that circuit. I have used a circuit tester and it appears everything is normal but still when I plug anything at all into any of the outlets the breaker trips. What would cause...

In process on installing withquestion on neutral wires. Do you take the neutrals out of the in the main panel neutral and put them in into the breaker where its labelled "load neutral terminal" and only have the neutral "pig tail" to the panel neutral bar? Thanks!

I have an outdoor pond. I think that my electrical connection got wet and shorted out. My question is, I changed out all the receptacles on the gfi circuit and only two work. Is it possible that the breaker is bad and does not supply all of the circuits now??

Is there a difference functionally between a GFI outlet and a GFI breaker? I am installing a jetted tub in the basement. The water pump has the two loose wires (+ground) and indicates the connection to be made in junction box and be protected by a GFI. A GFI for my type breaker is $300. I had...